| |
| SIXNET
provides you with the industrial certifications that you need: |
| |
| |
| Directive
Compliance for the European Community: |
| 
www.europa.eu.int
|
SIXNET
connectivity products are designed, manufactured, and verified
to comply with the following European Union (EU) directives, as
applicable:
- EMC
Directive - Council Directive 89/336/EC relating to
ElectroMagnetic Compatibility
- Low
Voltage Directive - Council Directive 73/23/EC relating
to electrical safety of "low voltage" devices
- RTTE
Directive - Council Directive 99/5/EC relating to Radio
and Telecommunications Terminal
Equipment
- ATEX
Directive - Council Directive 94/9/EC relating to equipment
and protective systems intended for use in potentially explosive
atmospheres (SIXNET complies for Group II, Category 3 locations)
- RoHS
Directive - Council Directive 2002/95/EC relating to
the Restriction
of Hazardous Substances
(SIXNET is in the process of complying to RoHS - see RoHS
Compliance Statement)
View the declaration of conformity
For
details on CE please go to: |
|
| |
| Immunity
for the European Community: (see
CE links above) |
|
www.europa.eu.int
|
SIXNET
connectivity products have been tested and verified by a third
party test lab and/or SIXNET. The samples were found
to be immune to radiated RFI, ESD, and line-conducted burst interference
in accordance with EN 50082-1 or EN 61326-1.
View
the declaration of conformity
This
includes compliance with the standards listed below (as applicable): |
- EN61000-4-2 (IEC801-2) – ESD immunity
- EN61000-4-3 / ENV50204 (IEC801-3 / ENV50140) – Radiated
immunity
- EN61000-4-4 (IEC801-4) – Fast transient immunity
- EN61000-4-5 (ENV50142) – Surge immunity
- EN61000-4-6 (ENV50141) – Conducted immunity
- EN61000-4-8 – Magnetic fields immunity
- EN61000-4-11
– Voltage interrupts immunity
|
|
Many SIXNET
connectivity products have been tested and/or type approved
by Det
Norske Veritas to DNV Certification No. 2.4 for Class
A and B locations.
This testing includes compliance with all the standards listed
below.
View
the type approval at www.dnv.com
View
the type approval certificate
View
the verification documents
|
| DNV
# |
IEC/EN
Standard |
Test |
Description |
| 3.6.2 |
60068-2-6
(Fc) |
Sinusoidal
Vibration |
3-13.2Hz:
±1mm / 13.2-100Hz: 0.7g |
| 3.7 |
600
68-2-2 (Bb,Bd) |
Dry Heat |
70°C
/ 16 hours |
| 3.8 |
600
68-2-30 (Db) |
Damp Heat |
Two
cycles, each 24 hours, 20/55°C, 95% RH |
| 3.9 |
60068-2-1 |
Cold |
0°C
/ 16 hours |
| 3.4 |
60092-504 |
Power Supply Failure |
3
interruptions, 30s duration |
| 3.5 |
60092-504 |
Power Supply Variation |
Four
combo. of ±10% volt deviation & ±5% frequency deviation
|
| 3.12 |
60092-504 |
Insulation Resistance |
Power
lines - gnd: >100Mohm / >10Mohm |
| 3.13 |
60092-504 |
High Voltage |
1500V
line to gnd: / 1min |
| 3.14.9 |
61000-4-2 |
Electrostatic Discharge |
±8kV
air discharge / ±6 kV contact discharge |
| 3.14.5 |
61000-4-4 |
Electrical Fast Transient / Burst |
Power
lines: ±2kV / Signal lines: ±1kV |
| 3.14.6 |
61000-4-5 |
Electrical Slow Transient / Surge |
Power
input: ±0.5 kV, line-line / ±1kV, line-earth |
| 3.14.8
|
61000-4-3
|
Radiated Susceptibility |
80
MHz - 3GHz / 10 V/m 80% AM 1kHz |
| 3.14.7 |
61000-4-6 |
Conducted High Frequency |
Power
input/Signal: 10 KHz-80MHz / 3V / 80% AM |
| 3.14.4 |
60945 |
Conducted
Low Frequency |
Power
input (110VAC): 0.05-10KHz |
| 3.15.3 |
60533
/ 50081-2 |
Radiated
Emissions |
30-1000MHz
|
| 3.15.3 |
60533
/ 50081-2 |
Conducted
Emissions |
10KHz-20MHz
|
| 3.2 |
- |
Visual
Inspection |
Electrical/mechanical
construction & workmanship |
| 3.11 |
IEC
92-504 |
Inclination |
Static
and dynamic |
|
| |
| TELCOM
for Telephone Modem Products: |
| 
www.fcc.gov
|
The
VT-MODEM was tested by a third party test lab and/or SIXNET.
The product complies with limits for a Class B
computing device pursuant to Subpart J of Part 15, and Part
68
of FCC rules.
The FCC registration number is 5KN-USA-34579-MD-E.
View
the verification documents |
| |
| 
www.ic.gc.ca
|
The
VT-MODEM has been certified by Industry
Canada to Specification CS03, Issue 8. The Industry Canada
certification number is 2991 8926 A. |
| |
| 
www.aca.gov.au
|
The
VT-MODEM has been certified by an approved third party test lab
in Australia to meet the following standards: ACA TS001-1997,
ACA TS002-1997, AS/NZS3260-1993 (incl. amendments 1,2,3,4), AS/NZS3548-1993
(incl. amendments 1,2), IEC950-1991 (incl. amendments 1,2,3,4).
View
the verification documents |
| |
| Product |
CE |
FCC |
DNV |
UL
508 |
cUL
(CSA) |
UL
1604 |
cUL
(CSA) |
Zone
2 |
C-Tick |
| Ethernet Switches
|
|
|
|
|
|
|
|
|
- |
VT-MODEM-###
Industrial Telephone Modems |
|
|
|
|
|
|
|
|
|
| Ethernet Fiber
Converters |
|
|
|
|
|
|
|
|
- |
| Ethernet
Modbus Gateways |
|
|
|
|
|
|
|
|
- |
| Device
Servers |
|
|
- |
|
|
|
|
|
- |
| Power
Supplies |
|
|
|
|
|
|
|
|
- |
|
Certified
to Perform
 |
| About
Us | Sales
| Support
| What's
New | WebStore
| Contact
| Advanced
Search 
