Just
click on a question below to get the answer:
 |
All SIXNET hardware
includes a license for the basic level of the SIXNET
I/O Tool Kit software. This utility allows you to configure, calibrate
and test your I/O. If you would like to use the IOmap shared database,
import/export tags, or perform peer to peer I/O transfers then you
need to purchase the SCS option group. If you need to perform datalogging
and client transfers in a SIXNET controller,
RTU, or
RemoteLog then you would need to purchase the Sixlog option group.
For stand alone control in these stations you need to purchase the
ISaGRAF programming
software. For LINUX
IPm controllers and RTUs, you need to purchase the LINUX option
group to utilizes these features. Feel free to install
or download this software in order to try it out.
When you purchase
an option group you will be assigned a serial number. Just fill out
the registration window in the SIXNET
I/O Tool Kit software including this serial number, and fax or
email this information to SIXNET. We will promptly send you a registration
number that will enable you to use the features that you paid for.
Most likely, because
there are several methods for interfacing to
SIXNET I/O. The first is with the SIXNET IOmap which is an option
of the SIXNET I/O Tool
Kit software. This shared database supports OPC, DDE, and direct
DLL calls. SIXNET also offers a
Modbus OPC Server that talks Modbus/TCP and provides access via
OPC or DDE. A third method is to use the Modbus/OPC driver that comes
with most HMI/SCADA software. Click below for more details:
Citect
Intellution FIX32
and iFIX Dynamics
Wonderware Intouch and Incontrol
Other HMI/SCADA
software
I'm getting an error when I install software
from the SIXNET CD?
First, restart your computer and make sure not to run any SIXNET software.
Make sure you don't have Power Switch in your Startup because this will
automatically run SIXNET software when your computer starts up. Then
retry the installation. Click
here for more installation trouble shooting
tips.
Back to Top
I just installed my software. What should I do
first?
The help for most SIXNET software has a Getting Started section. Just
refer to this section to learn the basics.
Back to Top
What should I do if I believe I have found a
bug?
First, make sure you have the latest version of the SIXNET software
in question. If not then click
here to install it. If this still doesn't solve the issue then contact
SIXNET technical support.
Back to Top
