 |
SIXNET
offers creative solutions that help automation engineers save
time and money.
Here
is what some of them have to say:
 |
|
See how
SIXNET
ranks high
for
Exceptional
Service! |
|
| |
"I
am the engineer at L-3 Communications who recommended
use of SIXNET
Ring Switches for our Naval voice communications system
(MarCom). I installed
these switches on the DDG98 ship in Pascagoula, Mississippi
on May 26, 2005,
and they have performed flawlessly since."
|
Ray
Geraci, Lead Engineer, Naval Communications Systems
|
|
|
| |
"I
have just received the SIXNET processor and I/O. I have
it installed and
started programming it. I have to admit when I first ordered
the 1210 I was a
little apprehensive. Having been surrounded by Allen-Bradley
products for the past
seven years, I was sure that I was in for a big learning
curve. I was wrong. I have
not had a quicker turn around on any processor-I/O than
what I have had with SIXNET.
From the shipping dock to operational in about two days.
I believe the on-board
data logging is going to cut my deployment times by at
least a day alone.
|
Michael
Rogers, Stationary Engineer, Major Automotive Manuf.
|
|
|
"I
never dreamed there could be a control system as flexible,
cost effective,
and reliable as SIXNET. We have been using SIXNET products
for more than
three years without so much as a single I/O point failing.
I have used PLCs
systems for
many years and have never seen that type of reliability.
"
|
| Bruce
Carlson, Powerhouse Engineering Manager, Rolls-Royce |
|
|
| "Thanks
for a producing a really slick device! This EtherTrak analog
input module is great...now I can monitor sensors all over
my facility and grab the data across my IP LAN." |
| Joe
Keith, Atlanta Bonded Warehouse |
|
|
| |
"Service
calls to the air traffic control facility at McMurdo,
Antarctica are
most inconvenient, so I'm glad that in spite of a layer
of frost, the
Industrial Ethernet Switches
we tested were still working at -104º F"
|
| Ken
Crawley, Space and Naval Warfare Systems |
|
|
“The
true beauty behind the SIXNET solution, aside from the affordable
cost, is we can accomplish the installation in house, connecting
one system or machine at a time.” |
|
Tom Jennings,
Superintendent, Rolls Royce Corp. |
|
|
“For
the past ten years we’ve come to count on
SIXNET modules throughout our product line.” |
| Jay
Park, ABB Power Rich Systems |
|
|
“We have
installed 80
SIXNET industrial modems on the highly
distributed pipelines in Alberta. They have been running
for a year now,
through the harsh Canadian winter, without a single failure.” |
| Keith
Hawkes, Neles Automation (formerly Valmet) |
|
|
|
“Dow Corning
relies on dataloggers to insure their product quality.
That’s why I felt like a hero when I replaced obsolete equipment
that
failed with a new SIXNET SCADA system in just one day.” |
| Rex
Crane, Integrator for Dow Corning |
|
|
“For 15
years SIXNET has continued to deliver reliable industrial
products
and long term service we need to maintain our
OEM product line.” |
| Larry
Basch, Engineering Manager, R & P Company |
|
|
"
SIXNET self-dialing
modems solve the problem of receiving alarm messages
from
PLCs and other equipment distributed at remote locations
throughout Sweden.
It has given us the solution we needed on many a important
projects." |
| David
Molin, Autic Systems, Landskrona, Sweden |
|
|
"
SIXNET world-wide
telephone modems enable Nalco Chemical to provide
reliable and timely service to our global customers. Modems
used to be our
biggest problem. SIXNET has sure made my job easier." |
| Chuck
Martin, Eng. Manager, Nalco Chemical Co. |
|
|
"As
an integrator, we install
SIXNET industrial modems in the control
cabinets we build so that we can continue to provide ongoing
services
to our customers through direct links to their automation
systems." |
| Rich
Consoli, President, Innovative Controls |
|
|
“Changing
our control from serial to Ethernet was a big improvement
on our transfer rate between the Interface and the controller.
Using the SIXNET Industrial
Switch met my shock and vibration needs and improved
performance when compared to a conventional hub.
Overall I am very happy that I now have a industrial, deterministic
control network.” |
| Dave
Crawford, Sys. Eng., Burr Oak Tool and Gauge |
|
|
|
"Late
last Friday, Robert got his software ported over to and
running on the IPm
hardware. Kudos ... for helping Robert up the learning curve.
Indeed kudos to your
software staff for producing high quality <IPm> software.
We were expecting a longer
port process and were pleasantly surprised when it took
only two days." |
| Erich
Hoefferle, Engineering Manager, USFilter Control Systems |
|
|
|
Certified
to Perform
 |
Reference List by Industry
