Obtain valuable
network management information or read/write I/O from the SNMP
agent (Simple Network Management Protocol) in your IPm
controllers or RTUs.
A Rules Wizard (see image below) in the I/O
Tool Kit configures the SNMP agent that has been integrated
into the IPm firmware. The I/O Tool Kit v2.2 and IPm
firmware v1.5 or later are required and may be downloaded
at no charge. Registered I/O Tool Kit users may purchase a license
to use this add-on management software directly from SIXNET. This
one license may be used with any number of IPm units owned by
the same licensee. Get
more info.
