SIXNET Home
 Home   |   About Us   |   Sales   |   Integration   |   Support   |   What's New   |   WebStore   |   Contact   |    Advanced Search
 Products:
  RTUs
  DCS Controllers
  I/O Modules
  Dataloggers
  Phone Modems
  Cellular Solutions
  Ethernet Switch
  OEM Solutions
  Software Tools
  Documentation
  eNewsletter
  Employment
  Reseller Tools

Industrial Ethernet Switches & Modems
Get Your FREE CD!

We are always looking
to expand our sales
channels. Contact Us
to become a Regional
Factory Representative, or a Local Distributor.

 Field Wiring Advantage
Simplify your control panels and make your job easier with the SIXNET wiring advantage. SIXNET I/O modules mount directly to your field wiring DIN rail, and reduce or eliminate the need for extra wiring terminals. With the I/O modules unplugged,

   Eliminate extra wiring
   Save design & wiring time
   Save valuable panel space
   Reduce installed cost
   Increase reliability through simplicity
their field wiring bases are rugged DIN rail terminals, complete with all of the features your electricians expect. Terminals are arranged in a single row and marked with your field wire designations. SIXNET I/O modules mount side by side with your other DIN rail devices.
 
Then...

Click for larger image

   For decades, wiring from control devices has been pre-wired to separate field marshalling terminals. Basically, this meant that you were doing the wiring twice.

Now...
Click for larger image This SIXNET cabinet, with the same I/O count is half the size and was wired in a fraction of the time. SIXNET I/O wiring bases snap right onto the DIN rail to create the SIXNET field wiring advantage.
 
 All the Features Electricians Expect:
SIXTRAK I/O wiring bases can directly serve as the field wiring terminals or "marshalling terminals" in your cabinet. With the I/O modules unplugged, these wiring bases are the rugged single row of DIN terminals your field installers expect. These wiring bases are internally pre-wired with

   A single row of field terminals
   2 adjacent terminals for each device
   Terminal designation labels
   No exposed electronics while wiring        (modules unplug for convenience)
   Built-in wiring diagram in very base
much of your panel wiring, so you save valuable design and installation time. Three styles of bases give you the choices you need for each application.
 

Field Ready
Wiring Base (-F)

The wiring bases are pre-wired in pairs to provide a signal and return for each input or output device. Only a single connection to the source of power is required. Since all panel wiring is internally pre-wired onto a high-quality printed circuit board (in the base), wiring errors are reduced and reliability is greatly enhanced.

  


Universal (Isolated)
Wiring Base (-U)

Each I/O channel is presented as a pair of isolated terminals. Any wiring scheme is possible with this ultra-flexible setup, including maintaining complete electrical isolation between each and every I/O channel.


High or Double Density
Wiring Base (-H or -D)


This "PLC-style" high-density base provides 16 single ended channels of I/O. All devices return to the same power source.

Back to Top
Industrial Ethernet Switches & Modems
BlueTree Wireless Data
What's new with SIXNET Automation

Certified to Perform
SIXNET Industrial Certifications