SixTRAK Local I/O for SIXNET controllers and remote terminal units (RTUs)

SixTRAK^® Local I/O

SixTRAK I/O is local I/O for SIXNET controllers and RTUs.
This "process quality" I/O is an excellent value because it
saves installation time and increases system performance
and reliability. With SIXNET I/O products you get the high-end performance of a DCS in a compact, open modular package.

SIXNET offers "Process Quality" I/O
SixTRAK I/O Selection Guide

Click for larger image

Featured Module: ST-MIX has 32 mixed I/O channels - Saves space & money.

Main Features:		Documentation:
Local "Process Quality" I/O expansion for SIXNET controllers and RTUs Mix and match up to 20 modules (640 I/O) True hot swap of modules in live systems DIN rail or direct panel mounting Rugged Lexan packaging UL, CSA, CE, DNV and Zone 2 rated -30 to + 70°C operating range Easy to use configuration software		More Information Comparison Chart FAQs Overview Data Sheets User Manual Support Certifications MTBF Data Configuration Tools

SIXNET SixTRAK^® Local I/O Selection Guide
Part Number (Module w/ Base)	I/O Count				Description	PDF Data Sheet
Part Number (Module w/ Base)	DI	AI	DO	AO	Description	PDF Data Sheet
ST-DI-005-08U or F	8	-	-	-	4-10 VAC/VDC	view
ST-DI-024-08U or F	8	-	-	-	10-32 VAC/VDC	view
ST-DI-048-08U or F	8	-	-	-	32-60 VAC/VDC	view
ST-DI-120-08U or F	8	-	-	-	60-140 VAC/VDC	view
ST-DI-240-08U or F	8	-	-	-	140-265 VAC	view
ST-DI-024-16H	16	-	-	-	10-32 VDC, high density	view
ST-MIX16880-D *	16	8	8	-	Combination, double density I/O	view
ST-MIX12884-D *	12	8	8	4	Combination I/O w/4 AO	view
ST-DI-024-32D	32	-	-	-	10-32 VDC, double density	view
ST-DI-CNT-08U	8	-	-	-	4-30VDC, high-speed counters - 50 kHz	view
ST-D0-DC1-08U or F	-	-	8	-	0-60 VDC, 2A/channel	view
ST-D0-DC3-08U or F	-	-	8	-	60-150 VDC, 1A/channel	view
ST-D0-AC1-08U or F	-	-	8	-	16-140 VAC, 2A/channel	view
ST-D0-AC2-08U or F	-	-	8	-	140-265 VAC, 2A/channel	view
ST-DO-DC2-16H	-	-	16	-	10-32 VDC, 0.5 Amps per channel	view
ST-D0-RLY-06U	-	-	6	-	Form C (SPDT), 0-140 VAC/VDC, 2A	view
ST-AI-INS-08U	-	8	-	-	Instrumentation - thermocouples, mV...	view
ST-AI-20M-08F	-	8	-	-	4-20 mA, field wiring ready	view
ST-AI-20M-16H	-	16	-	-	4-20 mA, high density configuration	view
ST-AI-10V-08F	-	8	-	-	+/- 1, 2, 5, 10 volts	view
ST-AI-RTD-06U	-	6	-	-	RTD (100 Ohm platinum), -200 to 850°C	view
ST-AI-RTC-06U	-	6	-	-	RTD (10 Ohm copper), -200 to 260 °C	view
ST-AO-20M-04F	-	-	-	4	4-20 mA (requires 10-30V loop power)	view
ST-AO-20M-08F	-	-	-	8	4-20 mA (requires 10-30V loop power)	view
ST-AO-10V-08F	-	-	-	8	0-5, 0-10, +/-5, and +/-10 volts	view
SixTRAK I/O must be connected to a SIXNET Controller or RTU, such as a: SixTRAK IPm Open DCS Controller (ST-IPM-####) VersaTRAK IPm Open RTU (VT-IPM-####) SixTRAK I/O Controller (ST-GT-1210) EtherTRAK Redundant Ethernet I/O Gateway (ET-GT-ST-3) EtherTRAK I/O Concentrator (ET-GT-ST-2) (* does not support ST-MIX modules)
* Note: The ST-MIX are supported only by IPm-based SIXNET Controllers, RTUs, & Gateways.


		These I/O modules seamlessly integrate into Scalable Control Systems (SCS)

Back to Top