|
Scalable Control Systems will save you time, give you greater creative
control over your projects, and in general, make your job easier.
Here are some of the reasons why. |
| 
Scalable
architecture grows gracefully
Modular
components – just the pieces you need
Pre-integrated
to save you time and money
Open
standards eliminate risks
High
performance – SCS solutions are state-of-the-art technology
Low
cost – for all of the above reasons
SCS
(Scalable Control System) features that make your job easier |
| Scalable
architecture grows gracefully
|
|
Your SCS systems can start small
and grow as your requirements develop. Build a small pilot project
and let the results speak for themselves. Its easy to use an SCS
solution as an add on to an existing automation system. SIXNET provides
the means to let your system evolve gracefully. You don’t need to
throw out your existing mature systems, just upgrade them in a manner
that best suits your plans. |
| Modular
components – just the pieces you need |
|
SCS systems are made up of functional hardware and software modules
that form the building blocks of automation systems. Hardware modules
include I/O, controllers,
power supplies,
Ethernet Switches, surge protectors,
modems and thousands of other DIN rail
mounted components from hundreds of suppliers. SCS software is modular
also. Add ISaGRAF programs to controllers
as best suits your needs. SCADA nodes and operator interfaces can
be added one at a time.
(In fact, with the new IPm products you can even connect pieces
over the Internet.) SCS modularity makes SCS solutions “Scalable”.
|
| Pre-integrated
to save you time and money |
| In
the past, you had two choices. A turnkey supplier could design and
install a system for you. This option was convenient, but generally
an expensive alternative. The second option was to purchase the
hardware and software components and integrate them yourself. With
this alternative, the headaches all fell on your shoulders and it
is questionable just how much money you really saved when you add
up all the time you spent getting the system running.
Scalable
Control Systems offer a third attractive alternative – a pre-integrated
solution that is a combination of the best hardware and software
to meet your requirements. SCS gives you the ability to purchase
an integrated solution – one in which the pieces fit together
seamlessly – for just the price of its components.
|
| Open
standards eliminate risks |
| There
are all kinds of risks involved with integrating a system and then
keeping it running efficiently for many years. First, there is the
risk of the pieces not fitting together seamlessly. Open communications
standards certainly minimize that hazard. Next, there is the “I
need one more feature” syndrome. As good as any piece of equipment
is, there can always be a benefit to adding a specialized device
from another supplier. Open standards give you the ability to mix
and match pieces – to add the special performance that the other
supplier of open equipment provides – for that special situation.
Finally, there is the risk of obsolescence as the years go by. Open
standards give you an out in this case too. It is almost inconceivable
that Modbus compatible I/O will not be available for decades to
come. The safe way to eliminate risks in software is to look towards
the wide open LINUX tools that are now available. LINUX is an adaptation
of UNIX, its been around for decades. It is growing in popularity,
and if all else fails, you have the unique ability to make changes
in the software to alter it to suit your changing needs. (You can’t
do that with a PLC or proprietary process controller!) |
| High
performance – SCS solutions are state-of-the-art technology |
| SIXNET
has long been a leader in providing innovative technology to the
automation industry. Our carefully planned technology provides ever-increasing
performance while maintaining the maturity of design that is essential
to reliable systems. |
| Low
cost – for all of the above reasons |
|
When millions of people all turn to the same products, quality increases
and cost tumble (through volume production and competitive pressure).
When you select Ethernet networking, Modbus communications, DIN
rail mounted hardware and LINUX software solutions, you are not
only reducing costs, you are making your job easier! |
| SCS
(Scalable Control System) features that make your job easier |
|
Asset management tools
LINUX open-source
tools
Global tag dictionary
Tag sharing between applications
System planning tools
“I/O for Windows” advantages
ISaGRAF IEC 61131-3 tools |
