 |
3-Port
Industrial Ethernet Media Converter |
|
|
Plug
and Play Simplicity! |
| |
|
| Product
Highlights: |
- Converts
RJ45 copper to fiber optic, or vice versa
- Two
10/100BaseTX auto-detecting RJ45 ports
- One
100BaseFX fiber optic port
- Truly
rugged design with -40 to 85°C operation
- Ideal
for real-time industrial use
- Plug
& play simplicity
- Direct
DC powered - no bulky adapter needed!
- Compact,
low-profile packaging that fits in tight spaces and shallow
enclosures
|
| |
Add
a fiber optic port to any existing Ethernet installation.The
ET-GT-3ES industrial Ethernet media converter connects your 10/100BaseTX
line to 100BaseFX fiber, or vice versa. This allows you to extend
your Ethernet network up to 120 km using high speed and noise
immune fiber optics. Like all SIXNET products, this converter
is designed for tough industrial environments and will operate
from -40 to +85 degrees C. In addition, an extra RJ45 port provides
an additional Ethernet port, so the original direct Ethernet connection
to your equipment is still available.
The ET-GT-3ES
is built upon SIXNET industrial Ethernet unmanaged switch technology.
Intelligent message routing avoids collisions and reduces network
loading. This advanced converter allows you to increase the throughput
of your real-time systems and achieve deterministic results. |
|
Fiber
optics increase distance and reliability.
Fiber optic cables are absolutely immune to electrical
and magnetic interference. Fiber optics cannot be damaged
by voltage transients. You will never spend time tracking
down a ground loop in a fiber optic network. This is because
an optical cable is not an electrical device. Fiber optic
cabling not only enhances reliability, it saves all the
time you might have spent tracking down those nasty communications
problems. In addition, fiber cables increase the allowable
direct cable lengths up to 120 km. |
|
| |
| Advanced
Hardware Features |
- Two Ethernet
Ports that are fully IEEE 802.3 compliant
- Both 10/100
RJ45 ports are auto-detecting, auto-crossover and auto-polarity
- One 100
Mbps fiber optic port for distances up to 120km
- 10-30 VDC
power input with industrial surge and spike protection
- DIN rail
or direct panel mounting (no extra kits required)
|
- Store &
forward wire speed switching - no delays
- Full-duplex
operation with flow control (no collisions!)
- Auto crossover
(MDI/MDIX) and auto polarity
|
| True
Industrial Design for Long-term Reliability |
- Ultra-reliable
with 1,000,000+ service-free hours (MTBF) ... More
info
- Unique
20-year support and service policy ... More
info
- Industrial
-40 to +85°C operating range ... More
info
- UL, CSA
(CUL), & CE certified ... More
info
- DNV marine
& offshore rated ... More
info
- Hazardous
locations rated for Class I, Div. 2 (Zone 2) areas ... More
info
|
| Operation |
Store and forward
wire speed switching, non-blocking |
| Modes |
Full or
half duplex operation with flow control supported on all
ports |
| MAC
Addresses |
1024 |
| Memory
Bandwidth |
3.2 Gbps |
| Latency
(typical) |
5 us for 100
Mbps and 16 us for 10 Mbps (plus frame time) |
| Ethernet
Isolation |
1500 Vrms 1
minute |
 |
 |
| RJ45
Ports |
Two
RJ45 ports that are fully IEEE 802.3 compliant |
| RJ45
Speed & Duplex |
10/100 auto-detecting
for speed & duplex (full or half) |
| RJ45
MDI/MDIX |
Auto-mdi/mdix-crossover
automatically supports either straight or crossed cables |
| RJ45
Polarity |
Auto-polarity
for automatic correction of crossed TXD and RXD pairs |
|
|
| Fiber
Optic Ports |
One 100 Mbps
fiber optic ports for distances up to 120km |
| Transceivers |
SC or ST style |
| Multimode |
Links up to
4 km typical; 1310 nm; use with 62.5/125 um fiber |
| |
- Transmitter
power (dB): -21 min, -17 typ, -14 max
- Receiver
sensitivity (dB): -34 typ, -31 max
|
| Singlemode |
Links up to
20 km typical; 1310 nm; use with 9/125 um fiber |
| |
- Transmitter
power (dB): -15 min, -11 typ, -8 max
- Receiver
sensitivity (dB): -36 typ, -31 max
|
| Singlemode
LongHaul |
Links up to
40 km typical; 1310 nm; use with 9/125 um fiber |
Special
Order |
- Transmitter
power (dB): -5 min, -3 typ, -0 max
- Receiver
sensitivity (dB): -36 typ, -34 max
|
| Longer
Distances |
Contact SIXNET
for distances up to 120 km |
| Eye
safety |
IEC60825-1,
Class 1; FDA 21 CFR 1040.10 and 1040.11 |
|
|
| Devices
Supported |
All
IEEE 802.3 compliant devices are supported |
| Standards |
IEEE 802.3,
802.3u, 802.3x |
|
|
| Input
Voltage Range |
10 to 30 VDC |
| Power
Consumption |
2.0 W typical
with all ports linked and active |
| Industrial
surge and spike protection |
15 kW peak,
5 kW (10 times for 10 us) |
|
|
| Operating
Temperature |
-40 to 85°C
(cold startup at -40°C) ... More
info |
| Storage
Temperature |
-40 to 85°C |
| Humidity |
5 to 95% RH
(non-condensing) |
| Vibration |
IEC68-2-6 |
| Shock |
IEC68-2-27 |
| Freefall |
IEC68-2-32 |
|
|
| Standards
and Certifications |
|
| Electrical
Safety |
UL508 &
CSA C22.2/14 per CUL, EN61010-1 ... More
info |
| EMC |
FCC part 15,
ICES-003, EN55022, IEC61326-1,
EN61326-1 (EN61000-4-2, 3, 4 and 6).. More
info |
| Hazardous
Locations |
UL1604, CSA22.2/213
per CUL (Class I, Div. 2, Groups A, B, C, D); EN50021/EN60079-15 (Zone
2), ... More
info |
| Marine
and Off-shore |
DNV (Det Norske
Veritas) No. 2.4 ...
More
info |
| MTBF |
Mean Time Between
Failure: >1,000,000 hours ... More
info |
| RoHS
and WEEE |
RoHS (Pb free)
and WEEE compliant ... More
info |
| ISO9001:2000 |
Certified "Total
Quality" company ... More
info |
| Industrial
Warranty |
3 years with
product registration ... More
Info |
|
|
| Case |
Low profile,
ideal for shallow enclosures and tight spaces |
| Material |
Rust-proof
Lexan and aluminum with clear protective coating |
| Protection |
IP30
protection from dust and debris |
| Mounting |
DIN rail or
direct to panel (no optional kits or accessories required) |
| Dimensions |
3.2" x
4.75" x 1.7" (8.1 cm x 12.1 cm x 4.3 cm) ... See
diagram |
| Weight |
8 oz. (0.23
kg) |
|
|
| |
|
Ordering Guide: |
|
| |
|
Part
Number |
RJ45
|
Fiber
Ports |
| ET-GT-3ES-2SC |
2 |
1
multimode SC for links up to 4 km |
| ET-GT-3ES-2ST |
2 |
1
multimode ST for links up to 4 km |
| ET-GT-3ES-3SC |
2 |
1
singlemode SC for links up to 20 km |
| ET-GT-3ES-3ST |
2 |
1
singlemode ST for links up to 20 km |
| Longer
Distances |
Contact SIXNET
for fiber distances up to 120 km. |
| ET-PS-024-02 |
2
Amp, AC to 24 VDC Power Supply, DIN rail mount |
| SP-ETH-2 |
Dual
Ethernet port surge & lightning protector (protects
2 ports) |
|
|
|
Click
on image to enlarge |
|
|
Certified
to Perform
 |
| About
Us | Sales
| Support
| What's
New | WebStore
| Contact
| Advanced
Search 
