 |
2-Port
Industrial Ethernet Media Converter |
|
|
| |
|
| Product
Highlights: |
- Converts
RJ45 copper to fiber optic, or vice versa
- One
10/100BaseTX auto-detecting RJ45 port
- One
100BaseFX fiber optic port
- Slim
packaging fits on your DIN rail
-
High performance and value
-
Truly industrial hardened design
-
Dual power inputs keeps you running
-
Plug & play saves you time and money
|
| |
SIXNET
Slim Line Industrial Ethernet Copper to Fiber Media Converters
(SL-2ES) provide fast performance allowing for real-time operation.
These ruggedized converters are industrial hardened to provide
superior reliability. They require no
user setup and immediately start operating as soon as you power
them up. These SIXNET converters are designed to make your job
easier.
SIXNET knows industrial –
We have been designing industrial hardware such as Remote Terminal
Units for over 25 years and have used this expertise to design
the toughest Ethernet switches on the market. Don’t trust
your critical communications to so-called industrial hardware
from commercial switch manufacturers. SIXNET switches give you
proven assurance that your system will keep running for years
to come.
|
|
Fiber
optics increase distance and reliability.
Fiber optic cables are absolutely immune to electrical
and magnetic interference. Fiber optics cannot be damaged
by voltage transients. You will never spend time tracking
down a ground loop in a fiber optic network. This is because
an optical cable is not an electrical device. Fiber optic
cabling not only enhances reliability, it saves all the
time you might have spent tracking down those nasty communications
problems. In addition, fiber cables increase the allowable
direct cable lengths up to 120 km. |
|
| |
| Advanced
Hardware Features |
- One Ethernet
Port that is fully IEEE 802.3 compliant
- The 10/100
RJ45 port is auto-detecting, auto-crossover and auto-polarity
- One 100
Mbps fiber optic port for distances up to 120km
- 10-30 VDC
power input with industrial surge and spike protection
- DIN rail
or direct panel mounting (no extra kits required)
|
- Store &
forward wire speed switching - no delays
- Full-duplex
operation with flow control (no collisions!)
- Auto crossover
(MDI/MDIX) and auto polarity
|
| True
Industrial Design for Long-term Reliability |
- Ultra-reliable
with 1,000,000+ service-free hours (MTBF) ... More
info
- UL, CSA
(CUL), & CE certified ... More
info
- Hazardous
locations rated for Class 1, Div. 2 (Zone 2) areas... More
info
|
| Operation |
Store and forward
wire speed switching, non-blocking |
| Modes |
Full or
half duplex operation with flow control supported on all
ports |
| MAC
Addresses |
1024 |
| Memory
Bandwidth |
3.2 Gbps |
| Latency
(typical) |
5 us for 100
Mbps and 16 us for 10 Mbps (plus frame time) |
| Ethernet
Isolation |
1500 Vrms 1
minute |
 |
 |
| RJ45
Port |
One
RJ45 port that is fully IEEE 802.3 compliant |
| RJ45
Speed & Duplex |
10/100 auto-detecting
for speed & duplex (full or half) |
| RJ45
MDI/MDIX |
Auto-mdi/mdix-crossover
automatically supports either straight or crossed cables |
| RJ45
Polarity |
Auto-polarity
for automatic correction of crossed TXD and RXD pairs |
|
|
| Fiber
Optic Ports |
One 100 Mbps
fiber optic port for distances up to 120km |
| Transceivers |
SC or ST style |
| Multimode |
Links up to
4 km typical; 1310 nm; use with 62.5/125 um fiber |
| |
- Transmitter
power (dB): -21 min, -17 typ, -14 max
- Receiver
sensitivity (dB): -34 typ, -31 max
|
| Singlemode |
Links up to
20 km typical; 1310 nm; use with 9/125 um fiber |
| |
- Transmitter
power (dB): -15 min, -11 typ, -8 max
- Receiver
sensitivity (dB): -36 typ, -31 max
|
| Singlemode
LongHaul |
Links up to
40 km typical; 1310 nm; use with 9/125 um fiber |
Special
Order |
- Transmitter
power (dB): -5 min, -3 typ, -0 max
- Receiver
sensitivity (dB): -36 typ, -34 max
|
| Longer
Distances |
Contact SIXNET
for distances up to 120 km |
| Eye
safety |
IEC60825-1,
Class 1; FDA 21 CFR 1040.10 and 1040.11 |
|
|
| Devices
Supported |
All
IEEE 802.3 compliant devices are supported |
| Standards |
IEEE 802.3,
802.3u, 802.3x |
|
|
| Input
Voltage Range |
10 to 30 VDC |
| Power
Consumption |
2.0 W typical
with all ports linked and active |
| Industrial
surge and spike protection |
15 kW peak,
5 kW (10 times for 10 us) |
|
|
| Operating
Temperature |
-10 to 60°C
(For wide temperature operation from -40 to 85°C please use
the ET-GT-3ES
or contact SIXNET
for other options.) |
| Storage
Temperature |
-40 to 85°C |
| Humidity |
5 to 95% RH
(non-condensing) |
| Vibration |
IEC68-2-6 |
| Shock |
IEC68-2-27 |
| Freefall |
IEC68-2-32 |
|
|
| Standards
and Certifications |
|
| Electrical
Safety |
UL508 &
CSA C22.2/14 per CUL, EN61010-1 ... More
info |
| EMC |
FCC part 15,
ICES-003, EN55022, IEC61326-1,
EN61326-1 (EN61000-4-2, 3, 4 and 6).. More
info |
| Hazardous
Locations |
UL1604, CSA22.2/213
per CUL (Class I, Div. 2, Groups A, B, C, D); EN50021/EN60079-15(Zone
2) , ATEX Group II, Cat 3 (Zone 2), EEx nA II T4 X ... More
info |
| MTBF |
Mean Time Between
Failure: >1,000,000 hours ... More
info |
| RoHS
and WEEE |
RoHS (Pb free)
and WEEE compliant ... More
info |
| ISO9001:2000 |
Certified "Total
Quality" company ... More
info |
| Industrial
Warranty |
3 years with
product registration ... More
Info |
| Note:
For wide temperature operation from -40 to 85°C and marine/offshore/maritime
(DNV) ratings please use the ET-GT-3ES.
|
|
|
| Case |
Slim line,
ideal for DIN rail mounting |
| Material |
Corrosion-proof
Lexan polycarbonate (UL94V0) |
| Protection |
IP30
protection from dust and debris |
| Mounting |
DIN rail or
direct to panel (no optional kits or accessories required) |
| Dimensions |
1.0" x
3.95" x 3.26" (2.54 x 10.0 x 8.28 cm) ... See
diagram |
| Weight |
4 oz. (0.11
kg) |
|
|
| |
|
Ordering Guide: |
|
| |
|
Part
Number |
RJ45
|
Fiber
Ports |
| SL-2ES-2SC |
1 |
1
multimode SC for links up to 4 km |
| SL-2ES-2ST |
1 |
1
multimode ST for links up to 4 km |
| SL-2ES-3SC |
1 |
1
singlemode SC for links up to 20 km |
| SL-2ES-3ST |
1 |
1
singlemode ST for links up to 20 km |
| SL-2ES-3SCL |
1 |
1
singlemode SC for links up to 40 km |
| SL-2ES-3STL |
1 |
1
singlemode ST for links up to 40 km |
| Longer
Distances |
Contact SIXNET
for fiber distances up to 120 km. |
| ET-PS-024-02 |
2
Amp, AC to 24 VDC Power Supply, DIN rail mount |
| SP-ETH-2 |
Dual
Ethernet port surge & lightning protector (protects
2 ports) |
|
|
|
Click
on image to enlarge |
|
|
Certified
to Perform
 |
| About
Us | Sales
| Support
| What's
New | WebStore
| Contact
| Advanced
Search 
