ST-GT-232-02N

$image\st-logo2_wmf.gif$

Modular I/O
Nonprogrammable Gateways


$image\btn_Specifications.gif$	$image\btn_Wiring.gif$	$image\btn_Usage.gif$	$image\btn_Ordering.gif$	$image\btn_Large_Image32.gif$	$image\btn_Data_Sheet32.gif$

Note:

Although this gateway is still available, other SIXNET DCS controllers are recommended for new designs. The ET-GT-ST-2 I/O Concentrator functionally replaces the ST-GT-232-02N nonprogrammable gateway in applications where a single serial port is required.

Select a ST-GT-232-02N when…

…the connection to the primary host (supervisory computer or distributed control system) will be an RS232 link.

$image\photo46_wmf.gif$

Key Features

¢	32-bit CPU optimizes performance and reliability.
¢	The Main port is optically isolated from the gateway circuitry for high immunity to ground loops and other types of noise. It should be used as the primary link to your supervisory host.
¢	Both the Main port and the Plant Floor port may be used to update I/O status. Either port can be set to communicate using Modbus protocol.
¢	Simultaneous communications from each port are possible. (Use a laptop PC for on-the-fly diagnostics.)
¢	Every SixTRAK station requires a gateway to perform I/O updating, communicate with the outside world and power the ST-Bus. There can be only one gateway in each station.