ST-GT-ETH-XXP Usage Tips

$image\st-logo2_wmf.gif$

Modular I/O
Programmable Gateways

		q
$image\btn_Specifications.gif$	$image\btn_Wiring.gif$	$image\btn_Usage.gif$	$image\btn_Ordering.gif$	$image\btn_Large_Image32.gif$	$image\btn_Data_Sheet32.gif$

ST-GT-ETH-xxP Usage Tips

This programmable gateway is typically used in any of these situations:

¢	When local control or applications programming must run in the gateway without a connection to a computer, or if supervisory computer control becomes unavailable.
¢	When standalone datalogging is required. The ST-GT-ETH-44P (1 MB) or ST-GT-ETH–54P (2 MB) models are recommended for datalogging applications.
¢	When standalone peer to peer communication with other gateways is required.

Ethernet Connections

Connect the Ethernet port on this and other gateways to any local or worldwide Ethernet network using standard Ethernet cabling and hub configurations. If each gateway is assigned a proper IP address, no conflicts will occur with other Ethernet devices.

TCP/IP Driver

All SIXNET communications use TCP/IP protocol over the Ethernet network. Your computer must be running a network driver that supports TCP/IP protocol. Network drivers are currently supplied with Windows 95 and Windows NT. Drivers are widely available for other versions of Windows.