RM-232-SETUP

$image\rt-logo_wmf.gif$

RS485 Remote I/O
Field Setup Module


$image\btn_Specifications.gif$	$image\btn_Wiring.gif$	$image\btn_Usage.gif$	$image\btn_Ordering.gif$	$image\btn_Large_Image32.gif$	$image\btn_Data_Sheet32.gif$

Select a RM-232-Setup when…

… you need to initially configure EtherTRAK and RemoteTRAK I/O modules or make changes to a live system in the field using a portable computer.

$image\photo12_wmf.gif$

Key Features

¢	Configure modules in live systems - the perfect "hot swap" tool
¢	Connects any Windows computer to the base of any RemoteTRAK or EtherTRAK module
¢	For RemoteTRAK, it lets you avoid RS485 conversion difficulties on your PC
¢	For EtherTRAK, it is recommended to initially set the IP address of the module
¢	Automatically addresses the target module for quick and easy set up
¢	Use one RM-232-SETUP to configure all of your RemoteTRAK and EtherTRAK modules

This module enables you to enter or alter the setup of any RemoteTRAK or EtherTRAK module right on the plant floor while your system is running. It connects to a portable PC using a standard SIXNET RS232 cable (supplied) and plugs into the base of the module being configured. (The user configuration for each RemoteTRAK or EtherTRAK module is stored in its wiring base so that modules may be hot swapped. Just plug a module into a live system and it self-configures from the "smart wiring, and instantly runs.) Refer to the usage tips for more information.