Extending the Reach of Open Systems…

RemoteTRAK is distributed I/O that can be scattered around your plant to access a small number of I/O points at each location. RemoteTRAK modules, with their combination of discrete and analog channels, give you the flexibility and convenience you are looking for in distributed I/O systems.

The Two-Wire RS485 Solution

RemoteTRAK modules connect to a simple and very economical two-wire RS485 network that addresses up to 128 modules (1024 I/O) at distances up to 3 kilometers! Isolation on the RS485 port of each RemoteTRAK module gives you unsurpassed reliability.

Modbus: The World’s First and Foremost Fieldbus

Modbus, with its 20 years of worldwide acceptance, is the only Fieldbus standard that simultaneously gives you compatibility with your existing and future plant installations. RemoteTRAK supports both Modbus ASCII and RTU protocols to share the bus with popular DCS, PLC, instrumentation and software from suppliers the world over.

Remote I/O for Windows

RemoteTRAK extends the reach of your SIXNET "Programmable I/O for Windows" systems into even the smallest remote site. RemoteTRAK I/O connects directly to VersaTRAK RTUs and can be freely combined with "Local I/O for Windows" in a well-integrated system. RemoteTRAK I/O is fully supported by all major Windows-based HMI and SCADA software packages.

A Pre-Integrated Part of Your SCS Solution

RemoteTRAK "Remote I/O for Windows" is a pre-integrated part of your Scalable Control Systems. Save development time and increase the performance of your system with the comprehensive and well-coordinated "SCS" Windows tools. Make your dream of true plug-and-play installations for your SCADA and control systems a reality. (Configure each I/O channel just once and share tag definitions with your other Windows applications.) With RemoteTRAK, your Scalable Control Systems start with just a few I/O points and scale up as your systems grow without limits.

RemoteTRAK Advantages