DNP3 Slave Driver

$image\logo2_wmf.gif$

Product Catalog
Add-on Applications

			q
$image\btn_IP_Security32.gif$	$image\btn_SNMP_Agent32.gif$	$image\btn_PPP.gif$	$image\btn_DNP3.gif$	$image\btn_Citect_Server32.gif$	$image\btn_AGA.gif$	$image\btn_Ordering.gif$

DNP3 Protocol

The DNP3 slave driver has been designed to enable data exchange with all types of I/O within IPm stations and to obtain the maximum advantage of IPm features while providing full compliance with DNP standards. This implementation is fully compliant with DNP V3.00 Subset Definition Level 2 and contains many Subset Level 3 features and some functionality beyond Subset Level 3. The SIXNET IPm DNP v3.00 slave driver is highly configurable and will run in most IPm-based DCS controllers and RTUs including all VT-IPM, VT-MIPM and ST-IPM models and the ST-GT-1210. Please note that it will not run in the ET-GT-ST-3.

¢	Fully compliant with DNP V3.00 Subset Definition Level 2 and contains many Subset Level 3 features and some functionality beyond Subset Level 3. Refer to the DNP Device Profile Document for a complete list of supported commands and capabilities. This document may be found at http://www.sixnetio.com/html_files/manuals/sixnet%20dnp3%20device%20profile.pdf
¢	Flexible and easy-to-use configuration tool that is fully integrated into the SIXNET I/O Tool Kit
¢	Supports DNP3 protocol over Ethernet and serial ports
¢	I/O to DNP objects mapping for any I/O type
¢	Event generation and attributes (Class) for every mapped DNP Object
¢	Unsolicited message generation for event reporting (configurable)
¢	Event generation (min. scan time 20 ms) and time-stamping at 1ms resolution
¢	Full run time debugging and message output tracing to a file or terminal
¢	Complete user manual with DNP Device Profile Document