SIXNET I/O Tool Kit Revision History

 

SIXNET I/O Tool Kit Revision History

 

New in Version 3.2 (4/07)

  1. Converted the help system to compressed html (CHM) format for Vista compatibility.

 

Service Pack 1 for Version 3.1 (1/07)
No new features were added. This release consists of a new copy of the file ‘sxcal.dll’. The copy of this file on the January 2007 SIXNET CD was corrupt, resulting in the calibration function not working in the version 3.1 SIXNET I/O Tool Kit.

 

New in Version 3.1 (1/07)

  1. Added support for the Mini-IPm Plus models (VT-MIPM-135 and VT-MIPM-245).

  2. Added the ability to easily add or remove ISaGRAF, AGA and/or DNP3 runtime drivers from IPm-based controllers.

The following improvements were made:

  1. The "Reset System Com Port" command now works more reliably for IPm-based controllers.

  2. The DNP3 configuration utility now successfully configures serial ports for DNP3 protocol as appropriate.

  3. Serial port settings are now set correctly for legacy VersaTRAK RTUs and SixTRAK gateways.

  4. PPP support for IPm-based controllers has been improved.

  5. The ISaGRAF export feature now remembers the last ISaGRAF project exported to.

 

Service Pack 1 for Version 3.0 (9/06)
No new features were added. The following improvements were made:

  1. The new user-adjustable Modbus integer, long and floating point register settings in the version 3.0 Tool Kit were affecting Modbus I/O Transfers, making them run improperly in some systems. The "Native Address" display was also affected where it shouldn’t have been. The adjustable Modbus boundaries now affect Modbus slave communications only.

  2. The ISaGRAF export in the version 3.0 Tool Kit was including the station prefix when the "tags from one station only" choice was selected. The station prefix is now properly omitted for that choice.

  3. The "Export inputs as ISaGRAF outputs" feature was omitted in the version 3.0 Tool Kit. It has now been restored.

  4. The version 3.0 Tool Kit was not able to open the File Operations window on a legacy VersaTRAK RTU. The correction has been made.

  5. When opening Tool Kit project files containing legacy VersaTRAK RTUs or SixTRAK gateways, the baud rate settings for the Plant Floor port were sometimes incorrect when using the SIXNET I/O Tool Kit version 2.9 or 3.0. The version 3.0 Tool Kit additionally introduced baud rate errors in some of the other serial port configurations. The correction has been made.

  6. The version 3.0 Tool Kit had difficulty loading certain Sixlog configurations to RemoteLog RTUs, legacy VersaTRAK RTUs and SixTRAK gateways. Retrieval of datalog records was sometimes affected as well.

 

New in Version 3.0 (7/06)

  1. Added the ability to change the allocation of Modbus integer, long and floating point registers. Accessed in the Advanced page of the IPm configuration windows of the SIXNET I/O Tool Kit.

  2. Added the ability to swap the word order of Modbus floating point values.

  3. Added support for tag names up to 64 characters. Click here for more information.

 

New in Version 2.9 (12/05)

  1. Added the ability to use IPm file system (flash) memory for Sixlog datalogging.

 

New in Version 2.8 (6/05)

  1. Added the ability to copy Sixlog configurations from one station to another.

  2. Added support for the Micro-VersaTRAK µIPm controller.

 

New in Version 2.7 (3/05)

  1. Added the ability to configure Ring Switch monitoring in IPm-based controllers.

  2. Added exporting of I/O Transfers to a .csv file for documentation purposes.

  3. Added importing and exporting of registration files to make the software registration process easier.

  4. The Load Advanced and Load All Now choices are included in all registration levels

  5. Telnet and FTP capabilities can be enabled with the Remote Access feature set, as well as the IPm Advanced feature set.

  6. Added a "User Software" configuration page and corresponding "Load User Software" command that let you automate the loading of application-specific software into IPm controllers.

 

Version 2.6 (10/04)

Major New Features

  1. Added the optional Citect Datalog Server Add-on.

  2. Added the optional DNP3 IPm Add-on.

  3. Added a feature for copying I/O Transfers from one station to another.

  4. Added the ability to print I/O Transfers.

  5. Added support for a "General Passthru" mode for new ET-GT-232 and ET-GT-485 gateways.

  6. Added support for the SixTRAK combination I/O module with analog outputs (ST-MIX12884-D).

 

Version 2.5 (7/04)

Major New Features

  1. Added automatic configuration feature that creates redundant IPm controllers.

  2. Added a time-saving Copy Tag Definitions feature.

  3. Added support for the Mini-VersaTRAK mIPm and the EtherTRAK combination I/O module (ET-MIX24880-D).

 

Version 2.4 (3/04)

Major New Features

  1. Added automatic linking of SixTRAK I/O modules to IPm, ST-GT-1210 and ET-GT-ST-3 controllers upon configuration load.

  2. Added special broadcast commands that allow most SIXNET controllers and I/O modules with serial numbers to be loaded and maintained, even when the serial number in the project file is blank or does not match the serial number written on the station.

  3. Added 0.1, 0.2 and 0.5 second rates to the discrete input counter feature of the RM-RTU-8440-F.

 

Version 2.3 (11/03)

Major New Features

  1. Added support for the RM-RTU-8440-F RemoteTRAK RTU.

  2. Added Ethernet-only loading of IPm firmware, beginning with version 1.6 firmware.

  3. Added support for PPP protocol to IPm serial ports. Requires a license for the PPP Add-on.

 

Version 2.2 (6/03)

Major New Features

  1. Added support for the ET-GT-ST-3 Redundant Ethernet gateway, the ST-DI-024-32D I/O module and the ST-MIX-16880-D combination I/O module.

  2. IO Transfers have been expanded to include "Block I/O Moves" within an IPm station, and also Modbus Ethernet I/O Transfers. (Note that version 1.7 or newer IPm firmware is required for these new capabilities. This firmware is available for download from www.sixnetio.com. The optional SCS feature set of the I/O Tool Kit is also required.)

  3. Added a tag name exporting function for the new SIXNET OPC Server (KepServerEx).

  4. Control Room IOmap functionality in the I/O Tool Kit is now hidden by default, unless the opened project file already contains IOmap information. The IOmap commands can be turned on if you select the "Show IOmap (Control Room) Features" command from the View menu of the SIXNET I/O Tool Kit. Although IOmap functionality is still supported, it is no longer the driver of choice for new applications. Whenever possible, use the built-in SIXNET driver (if one exists) in your HMI software, use the new SIXNET OPC Server or use a built-in Modbus driver or the Modbus OPC Server.

  5. The Tools menu can now be customized to include up to three shortcuts of your choice. These can be other Windows programs, documents or any other program or file that can be run from a command line.

  6. The "Files to Load" window for an IPm station now has a Preview button, Up/Down buttons for navigation, and the ability to specify relative paths for files to be included when loading the station.

7. The "Files to Load" window for an IPm station now has a checkbox that allows the I/O Tool Kit to set the I/O register allocation (Resources) in the IPm station when the Operations \f14Load \f14Load All Now (predefined files) command is used. (Note: either the "SCS" feature set or "Remote Access" feature set is required for this loading feature.).

8. The File Operations window for an IPm station now has a text editor to make it easier to set file permissions and edit text files, such as the startup script file for the station.

9. Zip files can now be specified in the "Files to Load" window, enabling Windows users to build and load configuration "bundles".

10. Two new Security option windows let you configure a unique and advanced level of security for each IPm station in your system. This advanced security feature requires a license for the IPm Security Add-on.

11. Added support for SNMP network management in IPm based products. This feature requires a license for the SNMP Add-on.

12. RemoteLog support has been expanded to include redundant client transfers and customized RemoteLog models.

 

Version 2.1 (11/02)

Major New Features

1. Added support for new products including the ET-GT-ST-2, and all IPm models including the ST-IPM-6350 (with 128 Meg Flash memory).

2. Added support for the Sixlog server as part of the optional Datalogging feature set. This software receives client initiated data transfers from RemoteLog and IPm RTUs.

3. Added utilities for the convenience of IPm users, including:

4. Added DHCP support to IPm stations. Requires IPm firmware build 1.2 or higher.

 

Version 2.01 (9/02)

Major New Features

  1. Full support for configuring, loading and maintaining IPm LINUX-based controllers and RTUs.

  2. A new "Convert Station Type" feature lets you easily change an existing station configuration to use an IPm station instead of a legacy SixTRAK gateway or VersaTRAK RTU.

 

Version 2.0 (6/02)

Major New Features

  1. Configuration support for the new IPm LINUX-based controllers and RTUs.

Note: This initial version 2 release will enable you to add IPm products to panel layouts and Bills of Materials and pre-configure your IPm stations. Free Tool Kit updates will be shipped with IPm products to support the additional new features and certain other functionality.

  1. New flexible software registration options. You can now select which advanced capabilities you wish to use, including:

  2. SCS system integration features (tag exporting, ISaGRAF, …)

  3. Sixlog datalogging, including the new client data transfer

  4. IPm advanced features – including adding your own LINUX programs

  5. Access the LINUX web server inside an IPm controller or RTU

  6. Support for the power saver features for the new low power RemoteLog RTU.

  7. A new I/O Transfer Wizard makes it even easier to configure I/O Transfers between SIXNET stations.

  8. Multiple "Connected To: paths can now be defined.

 

Version 1.20 (1/25/02)

Major new features:

  1. Added a new "Auto Detect Ethernet Stations" feature. This feature detects previously-configured SIXNET Ethernet stations and I/O modules on your Ethernet Network. Configuration readback, Ethernet address information and maintenance functions can then be performed.

  2. Added a DHCP Status window for RemoteLog RTUs. This window shows DHCP details for current RemoteLog RTUs, which now support DHCP.

  3. Added support for new RemoteLog alarming and expansion I/O port features

 

Version 1.11 (11/12/01)

Major new features:

Added new Industrial Ethernet Switches and a fiber optic converter to the Panel Layouts feature.

 

Version 1.10 (10/31/01)

Major new features:

  1. Complete support for RemoteLog, including the new Ethernet version. (I/O Tags can now be imported to and exported from RemoteLog stations.)

  2. Station configurations can now be copied between projects. (Projects can be merged and different versions of project files can be reconciled.)

  3. I/O gateways and RTUs now display an I/O Address map that shows the details of I/O register assignments.

  4. When configuring an I/O gateway or RTU to read or write Modbus I/O, the user now has the option of specifying a Modbus address or a SIXNET equivalent address.

 

Version 1.02 (9/10/01)

 

Initial Release