Data can be logged continuously at a rate from 30 mS (1 second and up for RemoteLog) up to approximately 49 days.
Data can be logged continuously, at a specified rate, while a Log/Stop signal is TRUE.
Datalogging can begin, at a specified rate, once the Log/Stop signal goes TRUE. Click here for more information.
A single data record can be logged each time a Log on Event signal from an ISaGRAF program goes from FALSE to TRUE.
A programmable SIXNET station can be configured to perform multiple levels of datalogging. For example, I/O might be logged every 5 minutes under normal conditions, but will be logged every second if an alarm condition is detected.